11:01Machine-translated from Azerbaijani by AIRead in Azerbaijani
Mod Brings Nvidia’s RTX 50-Exclusive Frame Generation Feature to RTX 40
Nvidia’s Multi Frame Generation feature, released exclusively for GeForce RTX 50 graphics cards, has also been enabled on the GeForce RTX 40 series through a mod. The solution developed by a developer named dashdogy was tested in Cyberpunk 2077. The test showed that the feature really does work on cards based on the Ada Lovelace architecture. The technology uses artificial intelligence to generate additional frames and make visuals appear smoother.
During testing, motion became smoother when MFG was increased beyond the official 2X level. However, at 4X and higher settings, visual artifacts appeared at the bottom of the screen. Similar issues also appear on GeForce RTX 50 cards. Without a monitor with a high refresh rate, the feature’s benefits are significantly reduced. The tests focused primarily on input latency. This is the time between pressing a button and seeing the response on the screen. At 1080p resolution, MFG 4X remained below the 60-millisecond threshold on all cards. The Blackwell-based RTX 5070 even showed lower latency than the RTX 4090. When the unofficial DLSS 5 was also enabled, the RTX 4070 Super and RTX 4070 significantly exceeded the acceptable latency threshold.
At 2560x1440 resolution with MFG 4X, latency remained at an acceptable level on all Ada Lovelace cards except the RTX 4070. When DLSS 5 was also enabled, only the RTX 4090 stayed within the 60-millisecond threshold. The RTX 4080 Super and RTX 4080 produced results close to that threshold. In the 4K test, MFG 4X alone produced usable results on all cards. Latency was unexpectedly even lower than in the 1440p test. When DLSS 5 was added, acceptable response times were recorded mainly on the RTX 5090 and RTX 4090. The RTX 5080 remained close to the threshold. The tests included only the RTX 4070 with 12 GB of memory and more powerful cards. The mod is still in development and is not as stable as the official solution. A new version that does not require ReShade could not be tested because it crashed in Cyberpunk 2077. Nvidia has not commented on official MFG support. However, DLSS 5 is scheduled to come to GeForce RTX 40 cards this year.
During testing, motion became smoother when MFG was increased beyond the official 2X level. However, at 4X and higher settings, visual artifacts appeared at the bottom of the screen. Similar issues also appear on GeForce RTX 50 cards. Without a monitor with a high refresh rate, the feature’s benefits are significantly reduced. The tests focused primarily on input latency. This is the time between pressing a button and seeing the response on the screen. At 1080p resolution, MFG 4X remained below the 60-millisecond threshold on all cards. The Blackwell-based RTX 5070 even showed lower latency than the RTX 4090. When the unofficial DLSS 5 was also enabled, the RTX 4070 Super and RTX 4070 significantly exceeded the acceptable latency threshold. At 2560x1440 resolution with MFG 4X, latency remained at an acceptable level on all Ada Lovelace cards except the RTX 4070. When DLSS 5 was also enabled, only the RTX 4090 stayed within the 60-millisecond threshold. The RTX 4080 Super and RTX 4080 produced results close to that threshold. In the 4K test, MFG 4X alone produced usable results on all cards. Latency was unexpectedly even lower than in the 1440p test. When DLSS 5 was added, acceptable response times were recorded mainly on the RTX 5090 and RTX 4090. The RTX 5080 remained close to the threshold. The tests included only the RTX 4070 with 12 GB of memory and more powerful cards. The mod is still in development and is not as stable as the official solution. A new version that does not require ReShade could not be tested because it crashed in Cyberpunk 2077. Nvidia has not commented on official MFG support. However, DLSS 5 is scheduled to come to GeForce RTX 40 cards this year.